Phụ kiện thay thế lưỡi xay pour-over Kinu - Kinu Pour-Over Replacement Burr
If you want to maximize the performance of your Kinu hand grinder for pour over and coarse grinding, this replacement cone burr is the ideal solution
| SKU | KNPORB |
| Xuất Xứ / Origin | Germany |
| Phân Loại / Type | Thiết bị/ Dụng cụ thay thế |
Price:
₫1,500,000
Back order
Kinu Pour-Over Replacement Burr
If you have a Kinu M47 hand grinder and want to achieve better performance for coffee grinding specifically for the pour-over method, the standard grinding burr can grind for any brewing method. However, this special design makes the grinder more suitable for pour-over coffee.
It creates the best coffee flavors and saves you grinding time, allowing you to enjoy your coffee moments every day.
Installation Instructions:
-
- Begin by loosening and removing the thumb screw at the top of the grinder by turning it counter-clockwise, then remove the handle and drive hub by pulling them both straight out.
- Using one hand to hold the center burr in place at the bottom of the grinder, loosen the adjustment wheel fully (counter-clockwise) and remove it.
- Carefully pull the center burr straight out from the bottom of the grinder, along with the drive axle.
- Remove the spring from on top of the center burr, and then remove the center burr itself.
- Replace the center burr with your new pour over/coarse grinding burr. Align the driving pin with one of the holes in the base of the burr.
- Place the spring back onto the drive axle on top of the burr, then carefully slide the axle back up through the bearings.
- Replace the adjustment wheel, again holding the cone burr in place as you screw the wheel clockwise to tighten. We recommend tightening the wheel fully (to "zero") and then loosening again by 3-4 revolutions as a starting point for pour over brewing.
- Align the drive hub with the fitting on the drive axle and push it into place. Insert the handle into the drive hub opening.
- Finally, insert and tighten the thumb screw by turning it clockwise until it is firmly in place.
- You're now ready to grind with your new pour over burr, enjoy!
Kinu Pour-Over Replacement Burr
Price:
₫1,500,000
Back order
